فارسی

عربي

Español

Português

Français

Electrical system

Home / Products / DONGFENG GX&KX / Electrical system / TPMS Tire Pressure Monitoring Receiver Module Assembly OE 3637110-TH770 for Dongfeng GX & KX Heavy Truck Parts

TPMS Tire Pressure Monitoring Receiver Module Assembly OE 3637110-TH770 for Dongfeng GX & KX Heavy Truck Parts

This genuine TPMS tire pressure monitoring receiver module with OE number 3637110-TH770 is factory original wireless signal processing electronic component exclusively matched for Dongfeng GX and KX heavy-duty trucks. It receives 433.92MHz radio frequency signals sent by wheel tire pressure sensors, processes real-time tire pressure and temperature data, and transmits valid signals to vehicle dashboard ECU to trigger low/high pressure alarm prompts. The module housing adopts high-strength anti-vibration PA66 engineering plastic. Internal RF circuit uses anti-interference shielding design to resist electromagnetic interference inside the cab. Integrated fully sealed circuit board prevents moisture and dust erosion. Standard multi-pin waterproof plug and mounting hole layout fully match original vehicle cab wiring harness for direct bolt-on installation. This TPMS receiver strictly passes DFCV OEM long-term RF signal stability test, road vibration fatigue test and -40℃~+85℃ wide temperature aging test. Authorized third-party automotive electronic inspection verifies communication protocol, frequency parameters and mounting dimensions fully consistent with factory original assemblies, widely used as replacement spare parts for TPMS fault warning, missing tire data and signal reception failure on Dongfeng GX & KX long-haul fleets.

Inquiry Now +

Next Prodcut +

PRODUCT DESCRIPTION

433.92MHz Stable RF Reception, Anti-EMI Shielded Circuit, Fully Sealed Anti-Moisture Housing

This OE 3637110-TH770 TPMS receiver module supports standard 433.92MHz frequency matching original wheel tire pressure sensors. Built-in metal shielding layer eliminates electromagnetic interference from engine and vehicle electrical equipment, ensuring continuous stable tire pressure signal capture on bumpy highways. The whole circuit board adopts epoxy full encapsulation to block cab moisture, dust and oil mist erosion. Reinforced rib plastic shell enhances anti-vibration performance during long-distance transportation. Single mounting hole position, plug pin definition and installation outline completely comply with Dongfeng GX & KX factory cab design standards. No wiring adapter or bracket modification needed during replacement. Accurate real-time tire pressure & temperature data effectively remind drivers of abnormal tire status to prevent sudden tire blowout accidents.

Weak Signal Reception, TPMS Dashboard Fault Alarm, Moisture Damages Internal Circuit

Heavy truck maintenance technicians often encounter typical TPMS module failures of inferior aftermarket receivers: poor RF shielding leads to signal loss and blank tire data on dashboard; incomplete sealing lets cab moisture corrode circuit chips; mismatched frequency cannot communicate with wheel sensors. This genuine DFCV OEM TPMS receiver module eliminates these hidden risks: professional anti-interference RF circuit ensures reliable signal reception; fully sealed structure extends service life, lowering tire pressure monitoring system overhaul frequency for Dongfeng GX & KX logistics fleets.

DFCV OEM GX/KX TPMS Electronic Standard, Multi-Round Vibration & Wide Temp Lab Testing

As core wireless receiving spare part of Dongfeng GX & KX heavy truck tire pressure monitoring system, this TPMS receiver module fully complies with Dongfeng Commercial Vehicle official heavy-duty vehicle electronic component production quality standards. Every finished receiver completes three mandatory durability laboratory tests: continuous RF signal stability aging test, thousands of times road vibration simulation fatigue test, alternating high-low temperature cycle test, maintaining normal signal processing performance under plateau cold climate, high-temperature summer and muddy rough road transportation environments. Unique traceability QR code and OEM part number marking are printed on module housing for genuine product verification. All shell outline, mounting hole spacing and wiring plug communication protocol strictly follow factory engineering drawings, zero assembly mismatch after replacement for all matching Dongfeng GX and KX heavy truck models.

In-Stock Genuine OEM TPMS Receiver Modules & Fast Low-Downtime Tire System Repair Wholesale Supply

We are authorized Dongfeng wholesale supplier of genuine DFCV OEM cab electronic spare parts for Dongfeng GX & KX heavy trucks, maintaining permanent sufficient stock of OE 3637110-TH770 TPMS tire pressure monitoring receiver modules. Each receiver is wrapped with anti-static shockproof foam inside reinforced export carton packaging to prevent internal RF chip damage, plastic shell scratch and plug deformation during cross-border sea and land logistics transit. Its pre-calibrated single-point mounting bracket and standard waterproof wiring plug allow professional heavy truck maintenance technicians to finish module replacement within 10 minutes without disassembling extra dashboard components, drastically cutting vehicle downtime for long-haul logistics fleets and truck TPMS fault repair garages. We provide a 12-month stable signal reception quality warranty plus free remote cab mounting matching installation guidance for all worldwide bulk wholesale buyers.

TECHNICAL SUPPORT

1. Accessories selection consultation

- Provide ** intelligent selection tools ** (such as parts matching query system), input the vehicle model VIN code or engine model to match the corresponding parts number, reducing the selection error rate.

The technical team is available online 7×12 hours to answer technical questions about accessories (such as material compatibility and installation processes).

2. Customized development support

We offer specialized R&D services for special market demands (such as heat dissipation accessories for high-temperature regions in the Middle East and dedicated suspension components for road conditions in Africa), and complete sample delivery within six weeks.

3. Training and Technical materials

Provide remote/on-site training for the customer's after-sales team (such as diagnosis of electrical control accessories and DPF regeneration operation), along with multilingual versions of the "Accessories Installation Manual" and "Troubleshooting Guide".

4. Quality Traceability and Improvement

Through the QR code traceability system (one product, one code), track the production batch of accessories and the source of raw materials, respond quickly to quality complaints and initiate improvement processes.

AFTER-SALES AND LOGISTICS SUPPORT

After-sales service

Quality Assurance Policy

-The warranty period for original factory parts is 12 months (counting from the date of signature for receipt), covering material defects, process issues, and man-made damage.

- Provide "Localized Express repair Service" : Cooperate with third-party repair networks in markets such as Southeast Asia and the Middle East, and deliver emergency parts to designated repair points within 4 hours.

Return and Exchange Process

-The customer is required to submit the test report (such as a third-party appraisal) within the warranty period. After confirmation by Dongfeng, a reissue or refund will be arranged within 5 working days.

Logistics support

Warehouse Layout

-Five major regional accessory centers have been established globally (Southeast Asia, the Middle East, Africa, South America, and Europe) to achieve "next-day delivery" for mainstream accessories (covering customers within the regions).

Emergency Logistics Plan

-Emergency parts can be directly delivered within 48 hours via the "Dongfeng Exclusive Aviation Special Line" (such as engine ECU, brake valves and other key components).

Packaging Optimization

-Use shockproof and moisture-proof packaging (such as honeycomb cartons + pearl cotton), and reinforce fragile parts (such as glass, sensors), keeping the damage rate within 0.5%.