Dongfeng GX Right Front Combination Light Assembly 3772020-C6200

Engineered exclusively for Dongfeng GX models, this combination light assembly matches OEM dimensions with ±0.2mm tolerance, ensuring perfect alignment with the front bumper and fender. The housing’s mounting points (4 pre-drilled holes) align exactly with the vehicle’s front frame, eliminating gaps that could allow water or dust ingress. The electrical connector (16-pin) is identical to the factory part, plugging directly into the Dongfeng GX’s wiring harness—no splicing or adapter needed. Unlike generic aftermarket lights, it follows the vehicle’s original contour, preserving the front-end aesthetics. Rigorously tested on Dongfeng GX test vehicles, it passes 200+ fitment checks to guarantee consistency. For repair shops and owners, this means a hassle-free replacement that maintains the vehicle’s structural integrity and avoids issues like misaligned beams or loose mounting

Constructed with high-grade materials, the assembly is built to resist harsh environmental factors. The housing uses impact-resistant PC (polycarbonate) plastic with a UV-resistant coating, preventing yellowing or cracking after 3,000 hours of sunlight exposure. The lens is treated with an anti-scratch layer (hardness rating 3H), resisting damage from small stones or debris. The internal seal features a double-layer EPDM rubber gasket, creating a waterproof barrier that meets IP67 standards—tested to withstand 30 minutes of water immersion at 1 meter depth without leakage. The electrical components are corrosion-resistant, with tin-plated connectors that prevent rust even in high-humidity or salt-rich environments (e.g., coastal areas). It also passes temperature cycling tests (-40°C to 85°C), ensuring stable performance in extreme cold or heat

The 3772020-C6200 assembly complies with strict safety and regulatory standards, ensuring reliability and legality. It meets ECE R10 (electromagnetic compatibility) to avoid interfering with the vehicle’s other electronic systems (e.g., GPS, radio). The low-beam and high-beam meet ECE R112 and FMVSS 108 (US standards), ensuring compliance with road safety regulations in major markets. The turn signal’s flash rate (60–120 flashes per minute) aligns with ISO 6720, preventing confusion for other drivers. Each unit undergoes rigorous quality checks: leak testing (100% air pressure inspection), light output measurement (using a spectrophotometer), and vibration testing (10–500Hz) to simulate road conditions. It also carries Dongfeng’s official quality certification, ensuring it meets the brand’s internal standards for performance and longevity. For owners, this compliance means the light is legal for road use and reduces the risk of failure that could lead to accidents

Designed for easy installation, the assembly requires no specialized tools, making it accessible to both professionals and DIY owners. The process takes 20 minutes max: 1) Disconnect the negative battery terminal to ensure safety; 2) Remove the 3 plastic clips securing the front bumper cover (using a standard flathead screwdriver); 3) Unplug the 16-pin electrical connector from the old light; 4) Remove the 2 mounting bolts (10mm) holding the old assembly; 5) Align the new assembly with the mounting points, secure the bolts, reconnect the connector, and reattach the bumper clips. No drilling, wiring modifications, or calibration is needed—all light functions work immediately after installation. The assembly includes a detailed instruction manual with step-by-step diagrams. For owners, this saves time and labor costs, avoiding expensive shop visits and ensuring minimal vehicle downtime