فارسی

عربي

Español

Português

Français

Chassis system

Home / Products / DONGFENG GX&KX / Chassis system / Suspension Hanger Rod Bracket Assembly OE 2908030-TL990 for Dongfeng GX & KX Heavy Trucks

Suspension Hanger Rod Bracket Assembly OE 2908030-TL990 for Dongfeng GX & KX Heavy Trucks

This genuine suspension hanger rod bracket assembly with OE number 2908030-TL990 is factory original chassis suspension structural component exclusively matched for Dongfeng GX and KX heavy-duty tractors. It connects vehicle frame and suspension stabilizer bar to limit lateral body displacement during cornering, braking and high-speed driving, effectively cutting chassis sway and tire uneven wear. The main body adopts thick seamless steel pipe with integrated welding process. Two ends use forged mounting lugs and built-in wear-resistant rubber bushing to absorb road vibration. Full black electrophoretic anti-corrosion paint prevents rust under muddy and humid road conditions. Standard hole pitch, mounting bushing size and overall length fully match original chassis layout for direct bolt-on replacement. This suspension rod strictly passes DFCV OEM tensile strength test, alternating load fatigue test and salt spray anti-rust test. Authorized third-party chassis component inspection verifies all structural dimension and load parameters fully consistent with factory original assemblies, widely used as replacement spare parts for loose suspension, excessive body tilt and abnormal chassis knocking noise on Dongfeng GX & KX long-haul fleets.

Inquiry Now +

Next Prodcut +

PRODUCT DESCRIPTION

Thick Seamless Steel Tube, Forged Lugs, Wear-Resistant Rubber Bushings, Anti-Rust Coating

This OE 2908030-TL990 suspension hanger rod uses heavy-wall seamless steel tube to bear heavy vehicle load without bending deformation. Both mounting ends are integral forged steel lugs with higher tensile strength than stamped parts, avoiding cracking under frequent heavy load impact. Built-in high elasticity natural rubber bushing buffers road vibration and eliminates metal-to-metal knocking noise. The whole rod undergoes full electrophoretic black coating to block moisture and mud corrosion. All mounting hole diameter, center distance and bushing outer diameter fully comply with Dongfeng GX & KX chassis OEM drawing standards. No cutting, bending or bushing replacement required during installation. Optimized structural rigidity greatly reduces body side tilt when overtaking and turning.

Thin Rod Deformation, Cracked Lugs, Rust Corrosion, Chassis Sway & Abnormal Knocking

Heavy truck maintenance technicians often encounter typical defects of inferior aftermarket stabilizer rods: thin-walled steel pipe bends under full load; stamped end lugs crack easily after long-term bumpy driving; incomplete anti-rust treatment causes surface rust and pipe wall thinning; hard low-quality bushings lead to loud chassis knocking noise. This genuine DFCV OEM suspension hanger rod eliminates these hidden risks: thick seamless tube + forged lugs guarantee structural strength; full anti-corrosion coating extends service life, lowering chassis suspension overhaul frequency for Dongfeng GX & KX logistics fleets.

DFCV OEM GX/KX Chassis Suspension Standard, Multi-Round Load & Anti-Rust Lab Testing

As core lateral stabilizing spare part of Dongfeng GX & KX heavy truck chassis suspension system, this hanger rod fully complies with Dongfeng Commercial Vehicle official heavy-duty chassis component production quality standards. Every finished suspension rod completes three mandatory durability laboratory tests: ultimate tensile breaking load test, millions of times alternating fatigue load cycle test, long-hour salt spray anti-corrosion aging test, maintaining stable structural performance under full-load highway transportation, muddy mountain roads and humid coastal environments. DFCV genuine spare part anti-counterfeit label and unique part serial number are attached on the tube surface for genuine product traceability. All overall length, mounting hole spacing and bushing assembly dimension strictly follow factory engineering drawings, zero assembly mismatch after replacement for all matching Dongfeng GX and KX heavy truck models.

In-Stock Genuine OEM Suspension Rods & Fast Low-Downtime Chassis Repair Wholesale Supply

We are authorized Dongfeng wholesale supplier of genuine DFCV OEM chassis suspension spare parts for Dongfeng GX & KX heavy trucks, maintaining permanent sufficient stock of OE 2908030-TL990 suspension hanger rod assemblies. Each rod is wrapped with shockproof foam inside reinforced export carton packaging to prevent forged lug collision, coating scratch and rubber bushing extrusion damage during cross-border sea and land logistics transit. Its pre-calibrated mounting hole spacing and OEM standard bushings allow professional heavy truck maintenance technicians to finish rod replacement quickly without extra machining, drastically cutting vehicle unstable driving downtime for long-haul logistics fleets and truck chassis fault repair garages. We provide a 12-month structural strength anti-breakage quality warranty plus free remote chassis suspension matching installation guidance for all worldwide bulk wholesale buyers.

TECHNICAL SUPPORT

1. Accessories selection consultation

- Provide ** intelligent selection tools ** (such as parts matching query system), input the vehicle model VIN code or engine model to match the corresponding parts number, reducing the selection error rate.

The technical team is available online 7×12 hours to answer technical questions about accessories (such as material compatibility and installation processes).

2. Customized development support

We offer specialized R&D services for special market demands (such as heat dissipation accessories for high-temperature regions in the Middle East and dedicated suspension components for road conditions in Africa), and complete sample delivery within six weeks.

3. Training and Technical materials

Provide remote/on-site training for the customer's after-sales team (such as diagnosis of electrical control accessories and DPF regeneration operation), along with multilingual versions of the "Accessories Installation Manual" and "Troubleshooting Guide".

4. Quality Traceability and Improvement

Through the QR code traceability system (one product, one code), track the production batch of accessories and the source of raw materials, respond quickly to quality complaints and initiate improvement processes.

AFTER-SALES AND LOGISTICS SUPPORT

After-sales service

Quality Assurance Policy

-The warranty period for original factory parts is 12 months (counting from the date of signature for receipt), covering material defects, process issues, and man-made damage.

- Provide "Localized Express repair Service" : Cooperate with third-party repair networks in markets such as Southeast Asia and the Middle East, and deliver emergency parts to designated repair points within 4 hours.

Return and Exchange Process

-The customer is required to submit the test report (such as a third-party appraisal) within the warranty period. After confirmation by Dongfeng, a reissue or refund will be arranged within 5 working days.

Logistics support

Warehouse Layout

-Five major regional accessory centers have been established globally (Southeast Asia, the Middle East, Africa, South America, and Europe) to achieve "next-day delivery" for mainstream accessories (covering customers within the regions).

Emergency Logistics Plan

-Emergency parts can be directly delivered within 48 hours via the "Dongfeng Exclusive Aviation Special Line" (such as engine ECU, brake valves and other key components).

Packaging Optimization

-Use shockproof and moisture-proof packaging (such as honeycomb cartons + pearl cotton), and reinforce fragile parts (such as glass, sensors), keeping the damage rate within 0.5%.