فارسی

عربي

Español

Português

Français

Body system

Home / Products / DONGFENG GX&KX / Body system / Side Reading Lamp OE 3714170-C6201 for Dongfeng GX & KX Heavy Trucks

Side Reading Lamp OE 3714170-C6201 for Dongfeng GX & KX Heavy Trucks

This genuine side reading lamp with OE number 3714170-C6201 is factory original cabin interior lighting spare part exclusively matched for Dongfeng GX and KX heavy-duty tractors, mounted on cab inner side panel to provide focused auxiliary lighting for driver reading documents, checking delivery orders and night-time rest. The whole shell is molded with high toughness PC plastic, resisting vibration impact and ultraviolet aging under long-term highway driving. Equipped with independent tactile push button switch, drivers can freely turn on/off local light without activating full cabin lamp, saving vehicle power. Built-in low power consumption LED light source emits even soft light without glare, protecting driver’s eyes during long haul trips. Standard integrated plug connector fully matches Dongfeng GX/KX cab wiring harness for direct clip-on installation without wire modification. This reading lamp strictly passes DFCV OEM long-hour vibration aging test, high-low temperature durability test and light attenuation inspection. Authorized third-party interior component test verifies housing dimension, plug pin definition and switch logic fully consistent with factory original assemblies, widely used as replacement spare parts for dim light, broken switch or cracked housing reading lamps on Dongfeng GX & KX logistics fleets.

Inquiry Now +

Next Prodcut +

PRODUCT DESCRIPTION

Tough PC Shockproof Housing, Independent Switch, Low-Glare LED Local Lighting

This OE 3714170-C6201 truck side reading lamp adopts integral high-toughness PC injection molded housing, with anti-aging matte surface finish to avoid yellowing and cracking under long-term sun exposure and road vibration. An independent tactile push button switch is embedded on the lamp surface, enabling drivers to control local lighting separately without turning on the main overhead cabin lamp, effectively reducing unnecessary 24V power drain when parked. The built-in LED lamp bead assembly outputs uniform soft focused light without harsh glare, suitable for checking logistics documents, reading maps and personal night rest inside the cab. The rear integrated plug socket is 1:1 matched with Dongfeng GX & KX original cab wiring harness, supporting direct clip-on snap installation without cutting cables or extra adapters, greatly shortening interior repair time. Internal metal conductive terminals are plated with anti-rust coating to prevent poor contact caused by cab humidity.

Brittle Plastic Easy Crack, No Separate Switch Waste Power, Glare Light Hurt Driver Eyes

Heavy truck cab maintenance technicians often face uncomfortable driving experience caused by inferior aftermarket reading lamps: thin brittle plastic housings crack easily under continuous chassis vibration; lamps without independent switches force drivers to turn on the whole cabin light, leading to unnecessary battery power loss during overnight parking; cheap high-brightness lamp beads produce harsh glare, causing eye fatigue when reading paperwork at night. This genuine DFCV OEM side reading lamp completely eliminates these drawbacks: shock-resistant tough PC shell extends service life; dedicated separate switch saves electric power; soft anti-glare LED protects vision, cutting cab interior lighting replacement frequency for Dongfeng GX & KX long-distance fleets.

DFCV OEM GX/KX Cab Lighting Standard, Multi-Round Vibration, Temp & Light Aging Lab Testing

As a core auxiliary interior lighting spare part of Dongfeng GX & KX heavy truck cab system, this side reading lamp fully complies with Dongfeng Commercial Vehicle official truck interior lighting component production quality standards. Every finished reading lamp completes three mandatory professional durability laboratory tests: 1000-hour continuous chassis vibration aging test, -40℃~+80℃ high-low temperature cycle test, long-term LED light attenuation inspection, maintaining stable lighting performance under cross-country highway, cold northern winter and high-temperature southern summer transportation environments. OEM part number laser marking is printed on the lamp rear shell for genuine product traceability, all overall outline size, plug pin layout and switch circuit parameters strictly follow original vehicle factory engineering drawings, zero assembly mismatch after replacement for all Dongfeng GX and KX heavy truck models.

In-Stock Genuine OEM Side Reading Lamps & Fast Low-Downtime Cab Lighting Repair Wholesale Supply

We are authorized Dongfeng wholesale supplier of genuine DFCV OEM cab interior spare parts for Dongfeng GX & KX heavy trucks, maintaining permanent sufficient stock of OE 3714170-C6201 side reading lamp assemblies. Each reading lamp is wrapped with shockproof bubble film and hard carton packaging to prevent PC shell scratch and internal LED bead damage during cross-border sea and land logistics transit. Its pre-matched integrated wiring plug and snap-fit mounting structure allow professional heavy truck maintenance technicians to finish full reading lamp replacement within 5 minutes without refitting cab interior panels or custom wiring adapters, drastically cutting vehicle downtime for long-haul logistics fleets and truck cab lighting fault repair garages. We provide a 12-month crack-free housing and stable LED lighting quality warranty plus free remote cab interior panel matching installation guidance for all worldwide bulk wholesale buyers.

TECHNICAL SUPPORT

1. Accessories selection consultation

- Provide ** intelligent selection tools ** (such as parts matching query system), input the vehicle model VIN code or engine model to match the corresponding parts number, reducing the selection error rate.

The technical team is available online 7×12 hours to answer technical questions about accessories (such as material compatibility and installation processes).

2. Customized development support

We offer specialized R&D services for special market demands (such as heat dissipation accessories for high-temperature regions in the Middle East and dedicated suspension components for road conditions in Africa), and complete sample delivery within six weeks.

3. Training and Technical materials

Provide remote/on-site training for the customer's after-sales team (such as diagnosis of electrical control accessories and DPF regeneration operation), along with multilingual versions of the "Accessories Installation Manual" and "Troubleshooting Guide".

4. Quality Traceability and Improvement

Through the QR code traceability system (one product, one code), track the production batch of accessories and the source of raw materials, respond quickly to quality complaints and initiate improvement processes.

AFTER-SALES AND LOGISTICS SUPPORT

After-sales service

Quality Assurance Policy

-The warranty period for original factory parts is 12 months (counting from the date of signature for receipt), covering material defects, process issues, and man-made damage.

- Provide "Localized Express repair Service" : Cooperate with third-party repair networks in markets such as Southeast Asia and the Middle East, and deliver emergency parts to designated repair points within 4 hours.

Return and Exchange Process

-The customer is required to submit the test report (such as a third-party appraisal) within the warranty period. After confirmation by Dongfeng, a reissue or refund will be arranged within 5 working days.

Logistics support

Warehouse Layout

-Five major regional accessory centers have been established globally (Southeast Asia, the Middle East, Africa, South America, and Europe) to achieve "next-day delivery" for mainstream accessories (covering customers within the regions).

Emergency Logistics Plan

-Emergency parts can be directly delivered within 48 hours via the "Dongfeng Exclusive Aviation Special Line" (such as engine ECU, brake valves and other key components).

Packaging Optimization

-Use shockproof and moisture-proof packaging (such as honeycomb cartons + pearl cotton), and reinforce fragile parts (such as glass, sensors), keeping the damage rate within 0.5%.