فارسی

عربي

Español

Português

Français

Body system

Home / Products / DONGFENG GX&KX / Body system / Side Cabin Reading Lamp OE 3714060-C6201 for Dongfeng GX & KX Heavy Trucks

Side Cabin Reading Lamp OE 3714060-C6201 for Dongfeng GX & KX Heavy Trucks

This genuine side reading lamp with OE number 3714060-C6201 is factory original interior lighting spare part exclusively matched for Dongfeng GX and KX heavy-duty tractors, installed on the inner cab side panel to provide focused auxiliary lighting for drivers to check logistics documents, read maps and rest at night. The lamp shell adopts high-toughness integral injection molded PC plastic, resisting long-term chassis vibration, ultraviolet radiation and temperature aging without cracking or yellowing. Equipped with a built-in independent sliding control switch, drivers can turn on partial lighting separately without activating the full cabin overhead lamp to save 24V battery power. The frosted PC light lens diffuses LED light evenly to eliminate harsh glare and protect driver vision. A pre-assembled 3-core waterproof wiring plug fully matches Dongfeng GX/KX original cab wiring harness for direct plug-and-play installation without wire cutting or adapter modification. This reading lamp strictly passes DFCV OEM continuous vibration aging test, -40℃~+80℃ high-low temperature cycle test and LED light attenuation durability test. Authorized third-party interior component inspection verifies mounting hole layout, plug pin definition and switch circuit fully consistent with factory original assemblies, widely used as replacement parts for dim lamp, broken switch and cracked housing reading lamps on Dongfeng GX & KX long-haul logistics fleets.

Inquiry Now +

Next Prodcut +

PRODUCT DESCRIPTION

Impact-Resistant PC Housing, Independent Switch, Pre-Wired Matching Plug

This OE 3714060-C6201 cab reading lamp uses thick high-toughness PC one-piece molded housing, with matte anti-aging surface that won’t fade or crack under bumpy long-distance transportation. The embedded sliding independent switch allows separate control of local reading light, avoiding power waste caused by turning on the whole cabin lamp during overnight parking. The frosted light cover uniformly scatters LED light to prevent eye fatigue when reading delivery orders at night. The rear is equipped with a pre-connected standard 3-core wiring plug that perfectly matches the original wiring harness of Dongfeng GX & KX, realizing direct plug installation without rewiring. Four symmetrical positioning mounting holes are reserved on the back shell, completely copying the cab interior panel installation size, and the buckle structure realizes quick disassembly and replacement without damaging the interior decoration. Internal copper conductive terminals are anti-rust plated to avoid poor contact caused by humid cab environment.

Fragile Plastic Crack, No Independent Switch Wastes Power, Mismatched Plug Needs Rewiring

Heavy truck cab maintenance technicians often encounter many troubles from inferior aftermarket reading lamps: thin brittle plastic shells crack easily under continuous road vibration; lamps without separate switches force drivers to turn on the full cabin light, accelerating battery power loss; non-matching wiring plugs require cutting and re-soldering vehicle wires, increasing repair difficulty and hidden short-circuit risks. This genuine DFCV OEM side reading lamp completely solves these pain points: shock-resistant thick PC shell extends service life; dedicated independent switch saves power; factory pre-matched plug eliminates wiring modification, reducing cab interior lighting overhaul frequency for Dongfeng GX & KX fleets.

DFCV OEM GX/KX Cab Lighting Standard, Multi-Round Vibration & Temp Lab Durability Tests

As a core auxiliary interior lighting component of Dongfeng GX & KX heavy truck cab system, this side reading lamp fully complies with Dongfeng Commercial Vehicle official heavy-duty vehicle interior lighting production quality standards. Each finished reading lamp undergoes three mandatory professional durability laboratory tests: 1000-hour continuous chassis vibration aging test, wide-range high-low temperature cycle aging test, long-term LED light brightness attenuation inspection, maintaining stable lighting performance in high-temperature southern summer, cold northern winter and dusty mountain transportation scenarios. The OEM part number is printed on the back of the lamp housing for genuine product traceability, all overall dimensions, mounting hole spacing and wiring plug pin definitions strictly follow the original vehicle factory engineering drawings, zero assembly mismatch after replacement for all Dongfeng GX and KX models.

In-Stock Genuine OEM Reading Lamps & Fast Low-Downtime Cab Repair Wholesale Supply

We are an authorized Dongfeng wholesale supplier of genuine DFCV OEM cab interior spare parts for Dongfeng GX & KX heavy trucks, keeping sufficient permanent stock of OE 3714060-C6201 side reading lamp assemblies. Each reading lamp is wrapped with shockproof bubble film and reinforced carton packaging to prevent PC shell scratches and internal LED bead damage during cross-border sea and land transportation. Its pre-calibrated wiring plug and standard mounting positioning posts allow professional heavy truck maintenance technicians to complete the entire reading lamp replacement within 6 minutes without refitting interior panels or custom wiring adapters, greatly reducing vehicle downtime for long-distance logistics fleets and truck cab lighting fault repair shops. We offer a 12-month quality warranty covering housing cracking and stable LED lighting performance, plus free remote cab interior panel matching installation guidance for all global bulk wholesale buyers.

TECHNICAL SUPPORT

1. Accessories selection consultation

- Provide ** intelligent selection tools ** (such as parts matching query system), input the vehicle model VIN code or engine model to match the corresponding parts number, reducing the selection error rate.

The technical team is available online 7×12 hours to answer technical questions about accessories (such as material compatibility and installation processes).

2. Customized development support

We offer specialized R&D services for special market demands (such as heat dissipation accessories for high-temperature regions in the Middle East and dedicated suspension components for road conditions in Africa), and complete sample delivery within six weeks.

3. Training and Technical materials

Provide remote/on-site training for the customer's after-sales team (such as diagnosis of electrical control accessories and DPF regeneration operation), along with multilingual versions of the "Accessories Installation Manual" and "Troubleshooting Guide".

4. Quality Traceability and Improvement

Through the QR code traceability system (one product, one code), track the production batch of accessories and the source of raw materials, respond quickly to quality complaints and initiate improvement processes.

AFTER-SALES AND LOGISTICS SUPPORT

After-sales service

Quality Assurance Policy

-The warranty period for original factory parts is 12 months (counting from the date of signature for receipt), covering material defects, process issues, and man-made damage.

- Provide "Localized Express repair Service" : Cooperate with third-party repair networks in markets such as Southeast Asia and the Middle East, and deliver emergency parts to designated repair points within 4 hours.

Return and Exchange Process

-The customer is required to submit the test report (such as a third-party appraisal) within the warranty period. After confirmation by Dongfeng, a reissue or refund will be arranged within 5 working days.

Logistics support

Warehouse Layout

-Five major regional accessory centers have been established globally (Southeast Asia, the Middle East, Africa, South America, and Europe) to achieve "next-day delivery" for mainstream accessories (covering customers within the regions).

Emergency Logistics Plan

-Emergency parts can be directly delivered within 48 hours via the "Dongfeng Exclusive Aviation Special Line" (such as engine ECU, brake valves and other key components).

Packaging Optimization

-Use shockproof and moisture-proof packaging (such as honeycomb cartons + pearl cotton), and reinforce fragile parts (such as glass, sensors), keeping the damage rate within 0.5%.