فارسی

عربي

Español

Português

Français

Body system

Home / Products / DONGFENG GX&KX / Body system / Right Exterior Rearview Mirror With Bracket Assembly OE 8201015-GX106#KH for Dongfeng GX & KX Heavy Trucks

Right Exterior Rearview Mirror With Bracket Assembly OE 8201015-GX106#KH for Dongfeng GX & KX Heavy Trucks

This genuine right exterior rearview mirror and bracket assembly with OE number 8201015-GX106#KH is factory original cab exterior vision component exclusively matched for Dongfeng GX and KX heavy-duty tractors. It adopts dual-lens structure consisting of main rearview mirror and wide-angle auxiliary mirror to eliminate visual blind spots. High-transmittance tempered mirror glass provides clear imaging in day and night conditions. The mirror housing is made of high-strength ABS plastic with anti-UV coating to resist aging and fading. Thickened integrated metal support bracket features strong shock resistance. Pre-assembled wiring harness follows original vehicle specification for direct plug-and-play installation. This side mirror strictly passes DFCV OEM vibration durability test, high-low temperature aging test and anti-shock test. Authorized third-party automotive exterior component inspection verifies mounting hole layout, outline dimension and wiring parameters fully consistent with factory original assemblies, widely used as replacement spare parts for broken glass, cracked housing and deformed brackets on Dongfeng GX & KX long-haul fleets.

Inquiry Now +

Next Prodcut +

PRODUCT DESCRIPTION

Dual-Lens Wide Vision, Tempered Clear Glass, Reinforced Anti-Vibration Bracket

This OE 8201015-GX106#KH right rearview mirror assembly adopts dual mirror design, combining main mirror and wide-angle auxiliary mirror to effectively reduce vehicle blind spots during lane change, overtaking and reversing. The mirror surface uses high-quality tempered glass, offering high definition and anti-glare performance. The outer shell is made of weather-resistant ABS material with anti-ultraviolet treatment, avoiding yellowing and cracking under long-term outdoor exposure. The thickened metal support bracket enhances overall structural rigidity and reduces mirror shake during high-speed driving. Mounting hole spacing, wiring connector and overall outline completely comply with Dongfeng GX & KX factory design standards. No cutting, drilling or bracket modification is needed during replacement. Optimized streamline housing also reduces wind resistance during driving.

Narrow Vision Causes Blind Spots, Thin Bracket Shakes Severely, Poor Shell Anti-Aging Performance

Heavy truck maintenance technicians often encounter common defects of inferior aftermarket rearview mirrors: single-lens structure leads to large visual blind areas; thin support bracket vibrates violently at high speed and affects observation; low-quality plastic shell fades and cracks quickly under sunlight. This genuine DFCV OEM right rearview mirror eliminates these hidden risks: dual-lens design expands observation range; reinforced bracket effectively suppresses shaking; durable housing adapts to all-weather environments, lowering exterior vision system maintenance frequency for Dongfeng GX & KX logistics fleets.

DFCV OEM GX/KX Exterior Mirror Standard, Multi-Round Vibration & Aging Lab Testing

As core exterior vision spare part of Dongfeng GX & KX heavy truck cab, this right rearview mirror assembly fully complies with Dongfeng Commercial Vehicle official heavy-duty vehicle exterior component production quality standards. Every finished mirror completes three mandatory durability laboratory tests: thousands of times road vibration simulation test, -40℃~+85℃ high-low temperature aging test, anti-collision shock resistance test, maintaining stable working performance under high-speed highway, bumpy mountain road and all-weather transportation environments. OEM part number marking and anti-counterfeit label are equipped on original packaging for genuine product traceability. All housing contour, bracket length, mounting hole position and wiring plug definition strictly follow factory engineering drawings, zero assembly mismatch after replacement for all matching Dongfeng GX and KX heavy truck models.

In-Stock Genuine OEM Rearview Mirrors & Fast Low-Downtime Cab Repair Wholesale Supply

We are authorized Dongfeng wholesale supplier of genuine DFCV OEM cab exterior spare parts for Dongfeng GX & KX heavy trucks, maintaining permanent sufficient stock of OE 8201015-GX106#KH right rearview mirror assemblies. Each mirror is fixed and wrapped with shockproof foam inside reinforced carton packaging to prevent glass breakage, shell scratch and bracket deformation during cross-border sea and land logistics transit. Its pre-calibrated mounting structure and standard wiring plug allow professional heavy truck maintenance technicians to finish mirror replacement within 20 minutes without refitting cab brackets or modifying wiring, drastically cutting vehicle downtime for long-haul logistics fleets and truck exterior mirror fault repair garages. We provide a 12-month quality warranty plus free remote cab mounting matching installation guidance for all worldwide bulk wholesale buyers.

TECHNICAL SUPPORT

1. Accessories selection consultation

- Provide ** intelligent selection tools ** (such as parts matching query system), input the vehicle model VIN code or engine model to match the corresponding parts number, reducing the selection error rate.

The technical team is available online 7×12 hours to answer technical questions about accessories (such as material compatibility and installation processes).

2. Customized development support

We offer specialized R&D services for special market demands (such as heat dissipation accessories for high-temperature regions in the Middle East and dedicated suspension components for road conditions in Africa), and complete sample delivery within six weeks.

3. Training and Technical materials

Provide remote/on-site training for the customer's after-sales team (such as diagnosis of electrical control accessories and DPF regeneration operation), along with multilingual versions of the "Accessories Installation Manual" and "Troubleshooting Guide".

4. Quality Traceability and Improvement

Through the QR code traceability system (one product, one code), track the production batch of accessories and the source of raw materials, respond quickly to quality complaints and initiate improvement processes.

AFTER-SALES AND LOGISTICS SUPPORT

After-sales service

Quality Assurance Policy

-The warranty period for original factory parts is 12 months (counting from the date of signature for receipt), covering material defects, process issues, and man-made damage.

- Provide "Localized Express repair Service" : Cooperate with third-party repair networks in markets such as Southeast Asia and the Middle East, and deliver emergency parts to designated repair points within 4 hours.

Return and Exchange Process

-The customer is required to submit the test report (such as a third-party appraisal) within the warranty period. After confirmation by Dongfeng, a reissue or refund will be arranged within 5 working days.

Logistics support

Warehouse Layout

-Five major regional accessory centers have been established globally (Southeast Asia, the Middle East, Africa, South America, and Europe) to achieve "next-day delivery" for mainstream accessories (covering customers within the regions).

Emergency Logistics Plan

-Emergency parts can be directly delivered within 48 hours via the "Dongfeng Exclusive Aviation Special Line" (such as engine ECU, brake valves and other key components).

Packaging Optimization

-Use shockproof and moisture-proof packaging (such as honeycomb cartons + pearl cotton), and reinforce fragile parts (such as glass, sensors), keeping the damage rate within 0.5%.