Original Dongfeng GX Right headlight bracket 8406132-C6200

Constructed from Dongfeng’s proprietary 2.8mm-thick high-strength cold-rolled steel (CR500 grade)—the same material used in factory production—the 8406132-C6200 bracket balances rigidity and impact resistance. The steel exhibits a tensile strength of ≥500 MPa, enabling it to withstand minor front-end impacts (e.g., debris collisions or low-speed scrapes) without bending or cracking. Integrated reinforcing ribs (engineered via finite element analysis) distribute stress evenly across the bracket’s frame, preventing deformation under load. Unlike plastic aftermarket brackets, it resists warping from extreme temperatures: maintaining shape at -35°C (cold climates) and 90°C (engine bay heat). This OEM-grade durability guarantees a service life of over 8 years, matching the truck’s original component lifespan

Following Dongfeng’s factory anti-corrosion protocols, the 8406132-C6200 bracket undergoes a four-step treatment process to resist rust and degradation. First, a zinc phosphate pretreatment (15-17μm thick) creates a porous base for enhanced coating adhesion. Second, an electrophoretic primer (20-22μm thick) provides uniform coverage—even in hard-to-reach crevices—to block moisture infiltration. Third, an epoxy mid-coat (18-20μm thick) adds an extra barrier against road salts and chemicals. Finally, a matte-black polyester powder coating (75-85μm thick) meets Dongfeng’s OE standards, passing 1200-hour neutral salt spray tests without red rust formation. This protection ensures the bracket maintains structural integrity in coastal (saltwater), snowy (road salt), or industrial (chemical debris) environments—outperforming aftermarket brackets by 300% in corrosion resistance

Manufactured using Dongfeng’s original 3D CAD data and CNC precision stamping, the 8406132-C6200 bracket achieves dimensional accuracy within ±0.08mm—exceeding aftermarket tolerances. It perfectly matches every contour, hole position, and connection feature of the GX’s front frame and headlight housing, eliminating gaps that cause rattling, misalignment, or water infiltration. The bracket includes four pre-drilled M6 threaded holes (depth: 11mm) that align with the GX’s factory mounting points, requiring no drilling, grinding, or modification to the vehicle’s front-end structure. It is fully compatible with all Dongfeng GX models produced since 2022 (including cargo, long-haul, and dump variants) and works seamlessly with the truck’s original headlight wiring and adjustment mechanisms—avoiding warranty issues from mismatched parts

Designed for hassle-free, factory-standard installation, the 8406132-C6200 bracket comes with a complete OE hardware kit: four grade 10.9 high-strength bolts (with anti-loosening nylon washers), four lock nuts, and two rubber gaskets (to prevent metal-to-metal friction). A single technician can install it in 12-18 minutes using standard hand tools (10mm socket wrench), following Dongfeng’s included installation guide (with torque values: 28±3 N・m) and alignment marks. This installation method preserves the truck’s original mounting points, maintaining validity of Dongfeng’s factory warranty—critical for fleet operators relying on OEM support. Backed by Dongfeng’s 24-month OE warranty, the bracket guarantees replacement for material defects (e.g., cracking, coating peeling) or manufacturing errors, providing long-term reliability for operators prioritizing original quality