Dongfeng GX white Front cover assembly with buffer plate 5301509-C6207

The part number 5301509-C6207 is a unique official identifier authorized by Dongfeng, distinguishing this genuine front cover assembly from counterfeits. Inputting it into Dongfeng’s database reveals production details (batch, date, quality reports) and supply channels for full traceability. Critically, the assembly features a factory-applied white finish (matching Dongfeng GX’s original white paint code) with a 3-layer coating (primer, basecoat, clearcoat) that ensures color consistency and gloss. The clearcoat provides scratch resistance (≥2H pencil hardness) and UV protection, preventing fading or yellowing. Unlike aftermarket painted covers, this factory finish requires no additional painting, saving time and ensuring alignment with the vehicle’s original appearance. The part number is etched on the cover’s inner side, remaining legible for authenticity checks

A key feature of this assembly is the built-in buffer plate (made of high-density EVA foam + steel backing) attached to the inner edge of the front cover. This buffer plate absorbs impact energy during minor collisions (e.g., low-speed parking bumps) or when the cover is closed too forcefully, preventing damage to the cover itself and the underlying engine components (e.g., radiator, battery). It also reduces vibration noise between the front cover and body frame while driving, lowering cabin noise by 2-3dB. The buffer plate is pre-installed at the factory (aligned with the body’s impact points) and bonded with high-strength adhesive, ensuring it does not detach during use. Tested under simulated impact conditions (5km/h collision), the buffer plate effectively reduces cover deformation by 40%, protecting both the assembly and vehicle components

To withstand outdoor exposure and daily use, the front cover body is made of high-strength galvanized steel (1.2mm thickness) with a tensile strength of ≥340MPa, resisting dents and corrosion. The steel undergoes electrophoretic coating before painting, providing an additional anti-rust layer (salt spray resistance ≥720 hours) to protect against rain, road salt, and moisture. The integrated hinge brackets and lock mounting points are reinforced with extra steel plates, enhancing load-bearing capacity and preventing cracking from repeated opening/closing. Every cover undergoes 100% quality inspection: dimensional checks, paint adhesion tests (cross-cut test ≥4B), and impact resistance tests, ensuring it meets Dongfeng’s durability standards (service life ≥10 years or 200,000km)

Designed for efficiency, this front cover assembly comes with pre-installed critical components (buffer plate, hinge bushings, lock reinforcement plate) to simplify installation. It uses the original mounting design: all holes align with the Dongfeng GX’s hinge pins and lock striker, requiring only standard tools (10mm socket wrench, torque wrench) to fasten bolts to the specified torque (25-30 N·m). No welding or drilling is needed, and the assembly can be installed by 2 people in 60-90 minutes (faster than aftermarket covers that require component assembly). A bilingual manual is included, with diagrams of mounting positions and precautions (e.g., adjusting hinge alignment for proper fit). Unlike non-OE covers, this assembly ensures the front cover operates smoothly (opening/closing without jamming) and maintains the vehicle’s original structural integrity