Dongfeng GX Right lower foot pedal 8405310-C6200 in stocked

Engineered to endure the repeated, high-impact stepping of commercial truck operations (average 700+ daily cycles), the 8405310-C6200 pedal features a reinforced steel frame with exceptional durability. The pedal plate is crafted from 4.5mm-thick cold-rolled steel (CR510LA grade) with a tensile strength of ≥530 MPa, capable of supporting a maximum vertical load of 980N (equivalent to 98kg) without bending or permanent deformation. The connecting arm (225mm in length) is forged from 40Cr alloy steel and heat-treated to HRC 40-42, resisting fatigue under cyclic stress—passing 280,000-cycle durability tests with no cracks or structural weakening. This robust build guarantees reliable performance even in high-intensity scenarios, such as frequent stop-and-go traffic in urban logistics or off-road construction sites

Exposed to foot sweat, road dust, and occasional liquid spills (e.g., coffee, brake fluid), the 8405310-C6200 pedal undergoes a rigorous protective treatment to resist corrosion and wear. The steel components receive a three-step coating process: a zinc phosphate pretreatment (13-15μm thick) for adhesion, an electrophoretic primer (19-23μm thick) for uniform corrosion resistance, and a matte-black polyurethane powder coating (75-85μm thick) that meets ISO 10289 standards. This system passes 1000-hour neutral salt spray tests without red rust, protecting against humidity in coastal areas or road salt residue tracked into the cabin. The anti-slip surface is further reinforced with a wear-resistant ceramic particle coating (3.8μm thick), ensuring the grip pattern remains intact for over 8 years of daily use

Exclusively tailored for Dongfeng GX heavy-duty trucks (including cargo, long-haul, and dump truck variants), the 8405310-C6200 pedal strictly adheres to original equipment (OE) specifications. Manufactured using CNC precision stamping and laser cutting, it achieves dimensional accuracy within ±0.13mm—perfectly aligning with the GX’s right-side lower footwell, clutch/brake linkage, and under-dash mounting brackets. The pedal features 4 pre-drilled mounting holes (M6 threaded, 12mm depth) that match the vehicle’s factory hole positions exactly, eliminating gaps that could cause rattling or misalignment. It is fully compatible with all Dongfeng GX models produced since 2022, including those with manual or automated manual transmissions (AMT), making it a direct replacement part for factory assembly or after-sales repairs

The 8405310-C6200 pedal prioritizes driver comfort and installation efficiency. Its ergonomic angle (15° from the horizontal) aligns with the natural resting position of a driver’s right foot, reducing calf and ankle fatigue during 8+ hour shifts—user tests show a 40% reduction in muscle discomfort compared to non-ergonomic pedals. The pedal’s edges are rounded (4.5mm radius) to prevent irritation from constant contact with footwear. For installation, it comes with a complete hardware kit (4 grade 10.9 high-strength bolts, lock washers, and anti-vibration gaskets) and requires no modification to the truck’s footwell. A single technician can install it in 12-18 minutes, 45% faster than non-OE alternatives, while the lightweight design (1.2kg) simplifies handling. The smooth powder-coated surface also allows easy cleaning with a damp cloth, maintaining cabin hygiene for fleet operators