Dongfeng GX Right headlight bracket 8406132-C6103 in stocked

Constructed from 2.5mm-thick high-strength cold-rolled steel (CR450 grade), the 8406132-C6103 bracket balances rigidity and impact resistance. The steel exhibits a tensile strength of ≥450 MPa, ensuring it can withstand minor front-end impacts (e.g., debris collisions) without bending or cracking. The bracket’s structure includes integrated reinforcing ribs along the edges and mounting points, which distribute stress evenly and reduce deformation under load. Unlike plastic alternatives, the steel construction resists warping from extreme temperatures—maintaining shape at -30°C (cold climates) and 85°C (engine bay heat). This durability guarantees a service life of over 7 years, outperforming plastic brackets by 200% in harsh operating conditions

Exclusively tailored for Dongfeng GX heavy-duty trucks (including cargo, long-haul, and dump variants), the 8406132-C6103 bracket strictly adheres to original equipment (OE) specifications. Manufactured using 3D laser scanning of the GX’s front-end frame and headlight mounting area, it achieves dimensional accuracy within ±0.1mm—matching every hole position, contour, and connection feature of the truck’s factory design. The bracket includes four pre-drilled M6 threaded holes (depth: 10mm) that align perfectly with the GX’s front frame rails and headlight housing, eliminating gaps that could cause rattling or misalignment. It is fully compatible with all Dongfeng GX models produced since 2021, requiring no drilling, grinding, or modification to the vehicle’s original front-end structure

Exposed to road salt, rain, mud, and humidity—common in front-end applications—the 8406132-C6103 bracket undergoes a rigorous three-step anti-corrosion treatment. First, a zinc phosphate pretreatment (12-14μm thick) creates a corrosion-resistant base and enhances coating adhesion. Second, an electrophoretic primer (18-20μm thick) provides uniform coverage, even in hard-to-reach areas like bracket crevices, to block moisture infiltration. Finally, a matte-black polyester powder coating (70-80μm thick) meets ISO 10289 standards, passing 1000-hour neutral salt spray tests without red rust formation. This protection ensures the bracket resists degradation in coastal (saltwater), snowy (road salt), or industrial (chemical debris) areas, maintaining structural integrity and appearance for long-term use

The 8406132-C6103 bracket is designed for hassle-free installation, ideal for truck fleet maintenance teams or repair shops. It comes with a comprehensive hardware kit that meets Dongfeng OE standards: four grade 8.8 high-strength bolts (with anti-loosening washers), four lock nuts, and two rubber gaskets (to prevent metal-to-metal friction and vibration). Installation requires only standard hand tools (10mm socket wrench) and can be completed by a single technician in 15-20 minutes: align the bracket with the front frame and headlight mounting points, secure with bolts, and torque to 25±3 N·m (per Dongfeng’s safety specifications). The kit includes a clear installation guide with torque values and alignment marks, reducing errors and ensuring compliance with the truck’s lighting system safety standards. The bracket’s lightweight design (0.8kg) simplifies handling, while its powder-coated surface resists scratches during installation—maintaining a professional look for fleet vehicles