Dongfeng GX Left logo door sill pressure strip assembly 5000519-C6200

Engineered exclusively for Dongfeng GX models, this assembly adheres to OEM dimensional standards with ±0.1mm tolerance, achieved via 3D scanning of genuine door sills and CAD modeling. Every detail—385mm length, 68mm width, and 4 snap-fit clip positions—matches the factory part, ensuring seamless integration. It fits flush against the left sill’s curvature, eliminating gaps that cause wind noise or water leakage. No modifications (drilling, trimming) are needed, as it uses the original mounting points. Rigorously tested on Dongfeng GX test vehicles, it passes 500+ fitment checks to guarantee consistency. For repair shops and DIY owners, this means a hassle-free replacement that maintains the vehicle’s structural integrity, avoiding loose fitment issues common with generic strips

Constructed from a high-grade ABS-PP polymer blend, the assembly offers exceptional durability. ABS provides 28MPa tensile strength, resisting cracks from accidental impacts (e.g., luggage bumps). PP enhances chemical resistance, repelling oil, coolant, and cleaning agents. Infused with UV stabilizers, it blocks 90% of harmful rays, preventing fading or brittleness over 5+ years outdoors. The 0.25mm-thick scratch-resistant surface withstands daily foot traffic—tests show no visible scuffs after 1,500 entry/exit cycles. It passes accelerated aging tests: -40°C to 80°C temperature cycling and 95% humidity exposure, with no structural degradation. For owners, this translates to a low-maintenance part that avoids frequent replacements, reducing long-term costs while keeping the door sill protected and the logo intact

Beyond aesthetics, the assembly delivers comprehensive protection. It acts as a physical barrier, preventing scratches, dents, and paint chipping on the left sill, preserving the underlying metal from rust. The integrated closed-cell foam gasket creates a tight seal between the door and sill, blocking 95% of dust, rainwater, and debris from entering the underbody—protecting nearby electrical components (e.g., door sensors) from water damage. It also reduces wind noise by 3–5dB at highway speeds (60–100km/h), enhancing cabin comfort. In cold weather, the seal minimizes cold air infiltration, easing the heating system’s workload. Tested in 100mm/h simulated rainfall, it ensures no water seepage; dust tests show minimal particle accumulation. This multi-layer protection extends the vehicle’s lifespan and maintains a clean, quiet interior

Designed for effortless installation, the assembly requires no tools, making it accessible to all. It features two reliable mounting systems: pre-applied 3M VHB high-tack adhesive tape (50N/cm² bonding strength) and 4 snap-fit clips. The adhesive’s peel-off liner ensures easy positioning, and it stays attached even under 50Hz vibration (tested for 100 hours). The clips align with the Dongfeng GX’s original sill holes, clicking into place for added security. Installation takes 15 minutes max: 1) Clean the sill with the included alcohol wipe to remove grease; 2) Align the strip using factory reference marks (ensuring the logo is correctly positioned); 3) Press firmly to activate adhesive and engage clips. Post-installation, it stays secure after 5,000+ door cycles and 10,000km driving. This design saves time and labor costs, allowing fast replacements without shop visits