Dongfeng GX Left fog lamp bracket 8406141-C6103 in stocked

Constructed from 2.2mm-thick high-strength cold-rolled steel (CR400 grade), the 8406141-C6103 bracket balances rigidity and impact resistance—critical for front-end components exposed to debris. The steel exhibits a tensile strength of ≥400 MPa, enabling it to withstand minor impacts (e.g., gravel collisions or low-speed curb scrapes) without bending or cracking. The bracket’s edges are reinforced with folded steel ribs that distribute stress evenly, preventing deformation under load (e.g., when cleaning the front bumper or removing the fog lamp for maintenance). Unlike plastic alternatives, it resists warping from extreme temperatures: maintaining shape at -30°C (cold climates) and 80°C (engine bay heat). This durability guarantees a service life of over 6 years, outperforming plastic brackets by 180% in harsh operating conditions

Exclusively tailored for Dongfeng GX heavy-duty trucks (including cargo, long-haul, and dump variants), the 8406141-C6103 bracket strictly adheres to original equipment (OE) specifications. Manufactured using 3D laser scanning of the GX’s front bumper and fog lamp mounting area, it achieves dimensional accuracy within ±0.12mm—matching every hole position, contour, and connection feature of the truck’s factory design. The bracket includes three pre-drilled M5 threaded holes (depth: 9mm) that align perfectly with the GX’s bumper reinforcement and fog lamp housing, eliminating gaps that could cause rattling, water infiltration, or wind noise. It requires no drilling, grinding, or modification to the vehicle’s original structure, ensuring compatibility with all Dongfeng GX models produced since 2021

Exposed to road salt, rain, mud, and humidity—common in front-bumper applications—the 8406141-C6103 bracket undergoes a rigorous three-step anti-corrosion treatment. First, a zinc phosphate pretreatment (11-13μm thick) creates a corrosion-resistant base and enhances coating adhesion. Second, an electrophoretic primer (17-19μm thick) provides uniform coverage—even in hard-to-reach crevices—to block moisture infiltration. Finally, a matte-black polyester powder coating (65-75μm thick) meets ISO 10289 standards, passing 900-hour neutral salt spray tests without red rust formation. This protection ensures the bracket resists degradation in coastal (saltwater), snowy (road salt), or industrial (chemical debris) areas, maintaining structural integrity and a professional appearance for long-term use

The 8406141-C6103 bracket is designed for hassle-free installation, ideal for truck fleet maintenance teams or repair shops. It comes with a comprehensive OE-spec hardware kit: three grade 8.8 high-strength bolts (with anti-loosening washers), three lock nuts, and two rubber gaskets (to prevent metal-to-metal friction and vibration). Installation requires only standard hand tools (8mm socket wrench) and can be completed by a single technician in 12-15 minutes: align the bracket with the front bumper and fog lamp mounting points, secure the bolts to 20±2 N·m (per Dongfeng’s safety specifications), and verify fog lamp alignment. The kit includes a clear installation guide with torque values and alignment marks, reducing errors and ensuring compliance with the truck’s lighting system safety standards. The bracket’s lightweight design (0.5kg) simplifies handling, while its powder-coated surface resists scratches during installation—preserving the fleet’s professional look