فارسی

عربي

Español

Português

Français

Body system

Home / Products / DONGFENG GX&KX / Body system / Cab Berth Reading Light Assembly OE 3714180-C6204 for Dongfeng GX & KX Heavy Truck Parts

Cab Berth Reading Light Assembly OE 3714180-C6204 for Dongfeng GX & KX Heavy Truck Parts

This genuine sleeper berth reading light assembly with OE number 3714180-C6204 is factory original cab interior lighting component exclusively matched for Dongfeng GX and KX heavy-duty trucks. It is installed above the cab sleeper berth to supply dedicated local lighting for drivers reading documents, operating mobile devices or resting at night. The lamp adopts high-uniform soft LED light source without glare, equipped with two independent rocker switches to separately control reading lamp and auxiliary interior light. The housing uses matte anti-scratch ABS plastic, with integrated foam sealing tape to eliminate gap rattling during vehicle vibration. Standard multi-pin integrated wiring connector fully matches original cab harness for direct plug-in installation without wire cutting. This berth reading lamp strictly passes DFCV OEM long-time LED aging test, bump vibration fatigue test and wide temperature alternating test. Authorized third-party automotive interior inspection verifies outline dimension, wiring pin layout and switch control logic fully consistent with factory original assemblies, widely used as replacement spare parts for dim light, switch failure and broken cab interior lamp on Dongfeng GX & KX long-haul logistics fleets.

Inquiry Now +

Next Prodcut +

PRODUCT DESCRIPTION

Soft Anti-Glare LED Light, Dual Independent Control Switches, Vibration Proof Sealed Housing

This OE 3714180-C6204 sleeper reading light features a honeycomb light diffusion lens to deliver soft, glare-free LED light that won’t irritate drivers’ eyes during night rest. Two separate rocker switches realize independent on/off control for reading lamp and auxiliary interior lamp, supporting flexible lighting mode switching according to demand. The whole lamp housing is wrapped with high-viscosity shock-absorbing foam tape to fill installation gaps and prevent abnormal rattling under rough road vibration. Standard multi-pin plug, overall outline and mounting buckle position fully comply with Dongfeng GX & KX original cab interior design standards. No bracket trimming or wiring modification needed during replacement. Low power consumption LED chip effectively reduces vehicle battery load during parking rest.

Harsh Glare Causes Eye Fatigue, Single Switch Inflexible Control, Vibration Trigger Abnormal Rattling

Heavy truck maintenance technicians often encounter typical defects of inferior aftermarket cab reading lamps: transparent hard lens creates strong glare and eye strain; only one single switch cannot separate berth reading and ambient lighting; thin plastic shell lacks shock absorption and produces continuous rattling noise while driving. This genuine DFCV OEM berth reading light eliminates these hidden risks: honeycomb diffuser softens light output; dual independent switches improve operation flexibility; built-in shockproof foam eliminates abnormal noise, lowering cab interior lighting system overhaul frequency for Dongfeng GX & KX fleets.

DFCV OEM GX/KX Cab Interior Standard, Multi-Round Vibration & LED Aging Lab Testing

As core interior lighting spare part for Dongfeng GX & KX heavy truck sleeper cab, this berth reading light fully complies with Dongfeng Commercial Vehicle official heavy-duty vehicle interior component production quality standards. Every finished reading lamp completes three mandatory durability laboratory tests: hundreds of hours continuous LED brightness aging test, thousands of times road bump vibration simulation test, -40℃~+85℃ high-low temperature alternating cycle test, maintaining stable lighting and switch performance under plateau cold climate, high-temperature summer and bumpy mountain transportation environments. OEM part number specification is marked on internal wiring harness for genuine product traceability. All housing outline, plug pin definition and mounting clip dimension strictly follow factory engineering drawings, zero assembly mismatch after replacement for all matching Dongfeng GX and KX heavy truck models.

In-Stock Genuine OEM Berth Reading Lights & Fast Low-Downtime Cab Interior Repair Wholesale Supply

We are authorized Dongfeng wholesale supplier of genuine DFCV OEM cab interior spare parts for Dongfeng GX & KX heavy trucks, maintaining permanent sufficient stock of OE 3714180-C6204 sleeper berth reading lights. Each lamp is wrapped with shockproof bubble film inside export carton packaging to prevent LED lens scratch, switch deformation and plug damage during cross-border sea and land logistics transit. Its pre-calibrated integrated plug and original matching outline allow professional heavy truck maintenance technicians to finish lamp replacement within 8 minutes without disassembling large dashboard panels, drastically cutting vehicle downtime for long-haul logistics fleets and truck cab interior repair garages. We provide a 12-month stable LED brightness and switch service quality warranty plus free remote cab sleeper mounting matching installation guidance for all worldwide bulk wholesale buyers.

TECHNICAL SUPPORT

1. Accessories selection consultation

- Provide ** intelligent selection tools ** (such as parts matching query system), input the vehicle model VIN code or engine model to match the corresponding parts number, reducing the selection error rate.

The technical team is available online 7×12 hours to answer technical questions about accessories (such as material compatibility and installation processes).

2. Customized development support

We offer specialized R&D services for special market demands (such as heat dissipation accessories for high-temperature regions in the Middle East and dedicated suspension components for road conditions in Africa), and complete sample delivery within six weeks.

3. Training and Technical materials

Provide remote/on-site training for the customer's after-sales team (such as diagnosis of electrical control accessories and DPF regeneration operation), along with multilingual versions of the "Accessories Installation Manual" and "Troubleshooting Guide".

4. Quality Traceability and Improvement

Through the QR code traceability system (one product, one code), track the production batch of accessories and the source of raw materials, respond quickly to quality complaints and initiate improvement processes.

AFTER-SALES AND LOGISTICS SUPPORT

After-sales service

Quality Assurance Policy

-The warranty period for original factory parts is 12 months (counting from the date of signature for receipt), covering material defects, process issues, and man-made damage.

- Provide "Localized Express repair Service" : Cooperate with third-party repair networks in markets such as Southeast Asia and the Middle East, and deliver emergency parts to designated repair points within 4 hours.

Return and Exchange Process

-The customer is required to submit the test report (such as a third-party appraisal) within the warranty period. After confirmation by Dongfeng, a reissue or refund will be arranged within 5 working days.

Logistics support

Warehouse Layout

-Five major regional accessory centers have been established globally (Southeast Asia, the Middle East, Africa, South America, and Europe) to achieve "next-day delivery" for mainstream accessories (covering customers within the regions).

Emergency Logistics Plan

-Emergency parts can be directly delivered within 48 hours via the "Dongfeng Exclusive Aviation Special Line" (such as engine ECU, brake valves and other key components).

Packaging Optimization

-Use shockproof and moisture-proof packaging (such as honeycomb cartons + pearl cotton), and reinforce fragile parts (such as glass, sensors), keeping the damage rate within 0.5%.