Dongfeng KR truck parts Right lower foot pedal cover 8405326-C5900

Designed to prevent slips during truck entry and exit (critical for drivers wearing work boots or in wet conditions), the pedal cover features a multi-pattern anti-slip surface. The top layer is molded with 2mm-high raised diamond-shaped ridges (density of 15 ridges per 100mm²) and 1mm-deep drainage grooves that channel away water, mud, or oil—delivering a coefficient of friction of 0.8 (2x higher than smooth plastic covers). Even when wet, the surface maintains strong grip, reducing the risk of falls by 60% compared to worn or uncoated pedal bases. Unlike flat or shallow-groove covers that lose traction over time, this deep-ridge design retains anti-slip performance even after 50,000+ entry/exit cycles (equivalent to 4 years of heavy use), ensuring long-term safety for drivers and passengers

Built to withstand daily wear, heavy foot pressure, and minor impacts (e.g., accidental kicks or tool bumps), the pedal cover uses high-grade PP (polypropylene) plastic reinforced with 15% glass fiber. This material combination delivers exceptional tensile strength (38 MPa) and impact resistance (22 kJ/m²), enabling it to endure 150kg of static foot pressure (well above average driver weight) without cracking or permanent deformation. The plastic is also treated with a UV-stabilized additive that prevents fading, brittleness, or discoloration—withstanding 1,200 hours of xenon arc testing (simulating 5 years of sun exposure) without surface degradation. Unlike thin ABS plastic covers that chip or break within 1–2 years, this reinforced PP design maintains structural integrity and appearance for 6+ years of daily use

Engineered to resist damage from work boots, road salt, oil, and cleaning chemicals (common in truck maintenance), the pedal cover features a durable thermoplastic elastomer (TPE) coating. The 3mm-thick TPE layer adds flexibility to absorb impact while forming a barrier against abrasion—withstanding 10,000 cycles of boot sole rubbing (per ASTM D4060) without visible wear. It also resists swelling, softening, or discoloration when exposed to diesel fuel, engine oil, or road salt (swell rate ≤3% after 72 hours of immersion in oil), ensuring the surface remains intact even in harsh working environments. Unlike uncoated plastic covers that scratch or stain easily, this TPE-coated design stays clean with minimal maintenance and retains its anti-slip properties over time

Designed for hassle-free replacement by fleet technicians or DIY owners, the pedal cover simplifies installation and upkeep. It requires no tools—installation takes 2–3 minutes: align the cover’s inner recess with the pedal’s base, press firmly along the edges until the 4 plastic clips “click” into the pedal’s mounting holes, and verify secure attachment by tugging gently. For maintenance, the cover wipes clean with a damp cloth (the TPE coating repels dirt and oil, no harsh cleaners needed), and the drainage grooves prevent debris buildup (no need for frequent scrubbing). If the cover becomes damaged, it can be removed quickly by prying the clips with a flathead screwdriver—no need to replace the entire pedal base. Each unit undergoes anti-slip testing, impact trials, and chemical resistance checks, backed by a 24-month warranty against defects (e.g., cracking, clip failure, coating peeling)