Dongfeng KR truck parts Left lower foot pedal cover 8405325-C5900

Designed to prevent slips during truck entry and exit (critical for drivers in work boots or wet conditions), the pedal cover features a multi-pattern anti-slip structure. The top surface is molded with 2mm-high diamond-shaped protrusions (15 protrusions per 100mm²) and 1mm-deep crisscross drainage grooves that channel away water, mud, or oil—delivering a coefficient of friction of 0.8 (double that of smooth plastic covers). Even when covered in rainwater or diesel residue, the surface maintains strong grip, reducing fall risks by 60% compared to worn or uncoated pedal bases. Unlike shallow-groove covers that lose traction over time, this deep-protrusion design retains anti-slip performance after 50,000+ entry/exit cycles (equivalent to 4 years of heavy use), ensuring long-term safety for drivers and passengers

Built to withstand daily foot pressure, heavy boots, and minor impacts (e.g., tool bumps or accidental kicks), the pedal cover uses high-grade PP (polypropylene) plastic reinforced with 15% glass fiber. This material combination delivers exceptional tensile strength (38 MPa) and impact resistance (22 kJ/m²), enabling it to endure 150kg of static foot load (well above average driver weight) without cracking or permanent deformation. The plastic is also infused with UV-stabilizers to prevent brittleness, fading, or discoloration—withstanding 1,200 hours of xenon arc testing (simulating 5 years of sun exposure) without surface degradation. Unlike thin ABS plastic covers that chip or break within 1–2 years, this reinforced PP design maintains structural integrity and appearance for 6+ years of daily use

Engineered to resist damage from road salt, diesel fuel, engine oil, and cleaning chemicals (common in truck maintenance), the pedal cover features a 3mm-thick TPE (thermoplastic elastomer) coating. The TPE layer adds flexibility to absorb impact while forming a barrier against abrasion—withstanding 10,000 cycles of boot sole rubbing (per ASTM D4060) without visible wear. It also resists swelling or discoloration when exposed to harsh substances: after 72 hours of immersion in diesel fuel, the coating shows a swell rate of ≤3%, far below the industry average of 8%. Unlike uncoated plastic covers that stain or degrade easily, this TPE-coated design stays clean with a simple wipe and retains its anti-slip properties even in harsh working environments

Designed for hassle-free replacement by fleet technicians or DIY owners, the pedal cover simplifies installation and upkeep. No tools are required: installation takes 2–3 minutes—align the cover’s inner recess with the pedal’s raised ribs, press firmly along the edges until the 4 clips “click” into place, and verify security by gentle tugging. For maintenance, the surface wipes clean with a damp cloth (the TPE coating repels dirt and oil, no harsh cleaners needed), and the drainage grooves prevent debris buildup (no frequent scrubbing required). If damaged, the cover can be removed quickly by prying the clips with a flathead screwdriver—no need to replace the entire pedal base. Each unit undergoes anti-slip testing, impact trials, and chemical resistance checks, backed by a 24-month warranty against defects (e.g., cracking, clip failure, coating peeling)