Dongfeng Kinland truck spare parts Right lower foot pedal 8405310-C0102

A core advantage of the 8405310-C0102 pedal is its exceptional load-bearing performance, tailored to withstand the demands of heavy-duty truck operations. The pedal platform is constructed from 6mm-thick high-strength steel (Q355B grade) with a reinforced underframe—featuring two crossbeams that distribute weight evenly across the mounting bracket. This design enables the pedal to support up to 600kg of static load (equivalent to 6x the average operator weight, plus tools) without bending or permanent deformation. The mounting bracket, made of 9mm-thick steel with welded gussets at stress points, ensures the pedal remains securely attached to the cab even under repeated heavy use (e.g., operators carrying toolboxes or equipment). For Kinland trucks in construction or mining, this high-load capacity eliminates the risk of pedal failure—critical for preventing workplace falls and injuries

The 8405310-C0102 pedal features a specialized anti-slip surface that prioritizes safety in harsh weather conditions. The platform’s top layer uses a diamond-patterned rubber overlay (4mm thickness, shore A hardness 75) bonded to the steel base via heat-press technology—creating deep, 2mm-wide grooves that channel away water, snow, and mud. This design maintains a high friction coefficient (≥0.85) even when wet or icy, far exceeding the safety threshold for slip resistance (≥0.5). Unlike generic metal pedals that become dangerously slippery in rain, the rubber overlay also provides a cushioned stepping surface, reducing foot fatigue for operators who enter/exit the cab 10+ times daily. Additionally, the rubber is oil-resistant (compatible with diesel and motor oil spills) and UV-stabilized—preventing cracking or fading in prolonged sunlight. For Kinland trucks operating in rainy, snowy, or dusty regions, this anti-slip design is a critical safety feature

Built to withstand corrosive environments—including road salt, coastal humidity, and industrial dust—the 8405310-C0102 pedal uses a comprehensive anti-corrosion system. The steel platform and bracket undergo three protective layers: first, a zinc phosphate pretreatment (8μm) to enhance coating adhesion; second, hot-dip galvanization (90μm zinc layer) for primary rust resistance; and third, a matte black polyester powder coat (70μm) that adds scratch protection and matches Kinland’s factory cab finish. This triple-layer protection passes 1,500-hour salt spray tests (ASTM B117 standard), ensuring the pedal remains rust-free for 8+ years—double the lifespan of generic pedals with single-layer coatings. The rubber overlay is made of EPDM (ethylene propylene diene monomer) rubber, which resists degradation from ozone, chemicals, and temperature extremes (-40°C to 120°C)—ensuring long-term performance in all climates

The 8405310-C0102 pedal is designed for efficient installation and flexible adjustment, minimizing Kinland truck downtime. It comes fully pre-assembled (platform + bracket) with all necessary hardware: 4x 10.9-grade stainless steel bolts (M10×35mm), lock washers, and EPDM rubber gaskets (to seal gaps between the pedal and cab, preventing water intrusion). The bracket features 25mm-long slotted holes, allowing ±15mm of horizontal and vertical adjustment to accommodate minor cab frame variations or operator preferences (e.g., taller operators can raise the step slightly for easier entry). Installation takes just 25-30 minutes for a single technician using standard tools (socket wrench, torque wrench set to 80-90 N·m)—no on-site drilling, cutting, or welding required. For fleet operators, this easy installation reduces labor costs, while the tool-free adjustment ensures the pedal can be fine-tuned to meet the needs of different drivers—maximizing both efficiency and comfort