Dongfeng KInland truck parts Right lower foot pedal 8405310-C0100

A core advantage of the 8405310-C0100 pedal is its exceptional load-bearing capacity, critical for supporting operators (and tools) during cab entry/exit. The pedal platform is constructed from 5mm-thick high-strength steel (Q235B grade) with a reinforced crossbeam design, capable of withstanding 500kg of static load (equivalent to 5x the average operator weight) without bending or deformation. The mounting bracket—made of 8mm-thick steel with welded gussets at stress points—distributes weight evenly across the cab frame, preventing localized damage to the cab exterior. For Kinland trucks used in construction, where operators often carry heavy tools (e.g., wrenches, gloves) while entering the cab, this high-load capacity ensures safe, stable stepping—reducing the risk of slips or falls that cause workplace injuries

The 8405310-C0100 pedal features a specialized anti-slip surface design to enhance safety in harsh weather conditions. The pedal platform is treated with a hot-dip galvanized finish followed by a diamond-patterned rubber overlay (3mm thickness, shore A hardness 70). This dual-layer design creates deep, textured grooves that channel away water, snow, and mud—maintaining high friction (coefficient ≥0.8) even when wet or icy. Unlike smooth metal pedals that become slippery in rain, the rubber overlay also provides a cushioned stepping surface, reducing foot fatigue for operators who enter/exit the cab frequently (e.g., delivery drivers or construction workers). For Kinland trucks operating in rainy or snowy regions, this anti-slip design significantly lowers the risk of accidental slips—critical for compliance with workplace safety standards

Built to withstand harsh operating environments—including road salt, industrial dust, and heavy rain—the 8405310-C0100 pedal uses corrosion-resistant materials for long-lasting performance. The steel platform and bracket undergo a multi-step anti-corrosion process: first, phosphatization (5μm zinc phosphate layer) to improve coating adhesion; then, hot-dip galvanization (80μm zinc layer) for primary rust protection; and finally, a polyester powder coat (60μm) in Kinland’s factory black finish. This triple-layer protection passes 1,200-hour salt spray tests, ensuring the pedal remains rust-free even in coastal regions (high humidity) or winter environments (deicing salts). The rubber overlay is made of oil-resistant EPDM rubber, which resists degradation from diesel spills or industrial chemicals—extending the pedal’s service life to 8+ years (2x longer than generic steel pedals)

The 8405310-C0100 pedal is designed for hassle-free installation and flexible adjustment, reducing Kinland truck downtime. It comes fully pre-assembled (platform + bracket) with all necessary mounting hardware: 4x 10.9-grade high-strength bolts (M10×30mm), lock washers, and rubber gaskets (to prevent water intrusion between the pedal and cab). The bracket features 20mm-long adjustment slots, allowing ±15mm fine-tuning of the pedal’s position to match uneven ground or operator preferences (e.g., taller operators may adjust the step slightly higher). Installation takes 30 minutes for a single technician using standard tools (socket wrench, torque wrench), with no on-site cutting or drilling required—pre-drilled holes align directly with the cab’s factory mounting points. For fleet operators, this easy installation and adjustment mean faster repairs, lower labor costs, and minimal disruption to daily operations