Dongfeng VL truck parts Right emblem decorative strip assembly 5000520-C4310

Crafted from high-impact ABS plastic (acrylonitrile butadiene styrene) as the base material, the decorative strip features excellent rigidity (flexural modulus: 2,800 MPa) and resistance to impact deformation—critical for withstanding minor road debris collisions. The surface is coated with a multi-layer chrome plating (8–10μm thickness) via an electroplating process, delivering a mirror-like high-gloss finish that matches the VL’s factory chrome accents (e.g., grille trim, door handles). The chrome layer undergoes a passivation treatment to enhance scratch resistance (pencil hardness: ≥H) and avoid fading under UV exposure. Compared to painted decorative strips, this chrome-plated ABS design retains its glossy appearance for over 3 years, resisting discoloration from sunlight, rain, or road chemicals

Designed to endure harsh outdoor conditions, the decorative strip integrates a dual-protection coating system. A clear polyurethane topcoat (15μm thickness) is applied over the chrome layer, forming a barrier against UV radiation (blocking 98% of UVA/UVB rays) to prevent chrome peeling or discoloration. The coating also resists corrosion from road salt, diesel fuel, and car wash chemicals—tested to withstand 500 hours of exposure to 5% salt spray without blistering or rust. The ABS base material is infused with anti-aging agents, maintaining its structural integrity in temperatures ranging from -40°C (cold winters) to 80°C (hot summers) without cracking or warping. This weather resistance ensures the decorative strip remains visually intact even after long-term use in extreme climates

The assembly features an integrated Dongfeng brand emblem (120mm×30mm) molded directly into the decorative strip, ensuring the logo is perfectly centered and aligned with the VL’s exterior design language. The emblem uses a raised 3D texture (0.5mm height difference from the strip surface) to create a tactile and visual focal point, enhancing brand recognition. The emblem’s color (Dongfeng’s signature red and silver) is applied via a high-temperature baking process, ensuring no fading or peeling even under frequent exposure to water or cleaning agents. Unlike separate emblem and decorative strip combinations, this integrated design eliminates the risk of emblem detachment and creates a cohesive, premium look for the truck’s exterior

The assembly offers flexible, hassle-free installation with two mounting methods to match the VL’s factory design. For areas with pre-drilled holes, it includes 4 stainless steel M4×10mm bolts (grade 304) and lock washers for secure bolt-on installation. For smooth surfaces, it features high-strength acrylic foam adhesive (3M VHB equivalent) pre-applied to the back of the strip—offering a bond strength of 15N/cm² that resists detachment from vibration or temperature changes. Installation takes 15–20 minutes: clean the mounting surface, align the strip with the VL’s body marks, either bolt it in place or press firmly for adhesive bonding, and allow 24 hours for adhesive curing. No drilling or modification to the truck’s body is needed, preserving the vehicle’s original structure. Each unit undergoes dimensional inspection, adhesion testing, and finish quality checks, backed by a 12-month warranty against defects (e.g., chrome peeling, adhesive failure, emblem fading)